# text: "Printing operations are not possible until you have selected a Printer using the Chooser. "
DITL_251_error1.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=257 y1=138 x2=315 y2=158
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=79 y1=15 x2=323 y2=100
# text: "Couldn\'t complete the last command because ^0."
# item 2: TEXT (0x88) disabled
# bounds: x1=81 y1=105 x2=325 y2=123
# text: "Result Code = ^1"
DITL_252_error2.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=257 y1=138 x2=315 y2=158
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=79 y1=15 x2=323 y2=100
# text: "Couldn\'t successfully startup or quit the application because ^0."
# item 2: TEXT (0x88) disabled
# bounds: x1=81 y1=105 x2=325 y2=123
# text: "Result Code = ^1"
DITL_253_assert.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=282 y1=142 x2=340 y2=162
# text: "Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=201 y1=142 x2=259 y2=162
# text: "Fail"
# item 2: BUTTON (0x04) enabled
# bounds: x1=114 y1=142 x2=183 y2=162
# text: "Continue"
# item 3: TEXT (0x88) disabled
# bounds: x1=57 y1=5 x2=347 y2=86
# text: "Assertion failed:\n^0"
# item 4: TEXT (0x88) disabled
# bounds: x1=60 y1=92 x2=302 y2=127
# text: "File: ^1\nLine: ^2"
DITL_300_OS Error.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=264 y1=104 x2=324 y2=124
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=16 x2=332 y2=87
# text: "^0\n\nResult Code = ^1"
DITL_1024_Needs 020 alert.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=177 y1=85 x2=235 y2=105
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=67 y1=11 x2=206 y2=63
# text: "Sparkle requires a Mac with a 68020 or higher processor."
DITL_1025_Stop icon alert.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=231 y1=98 x2=291 y2=118
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=54 y1=16 x2=308 y2=85
# text: "^0"
# item 2: ICON (0xA0) disabled
# bounds: x1=4 y1=15 x2=36 y2=47
# ICON resource ID: 0
DITL_1026_No Thread Manager alert.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=216 y1=144 x2=423 y2=168
# text: "I\'ll get the Thread Manager"
# item 1: BUTTON (0x04) enabled
# bounds: x1=64 y1=144 x2=192 y2=168
# text: "Tell me more ..."
# item 2: TEXT (0x88) disabled
# bounds: x1=67 y1=8 x2=424 y2=48
# text: "The Thread Manager extension is not installed on this Mac. Sparkle requires the Thread Manager to run."
DITL_1027_No Thread Manager alert 2.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=304 y1=272 x2=372 y2=292
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=64 y1=272 x2=279 y2=292
# text: "Give me the political speech ..."
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=376 y2=48
# text: "Threads are a way of splitting a program into pieces that each run separately. Sparkle uses threads to allow you to work on many things at once, like converting more than one file at a time."
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=56 x2=376 y2=104
# text: "The Thread Manager is an extension that Apple have written to allow Mac programs to use threads. Like other extensions it is simply a file you drag onto the System Folder on the Mac’s hard disk then forget about."
# item 4: TEXT (0x88) disabled
# bounds: x1=64 y1=112 x2=376 y2=176
# text: "If you have ftp access you can obtain the Thread Manager from ftp.apple.com in dts/mac/sys.soft/extensions/thread-manager-2-0-1.hqx. Otherwise ask your system administrator or knowledgable Mac friends to install it on your system."
# item 5: TEXT (0x88) disabled
# bounds: x1=64 y1=184 x2=376 y2=224
# text: "Thread Manager 2.0 and above work on both PowerPC and 68K macs."
DITL_1028_No Thread Manager alert.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=8 y1=272 x2=48 y2=294
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=384 y2=56
# text: "As a programmer who has worked on both Windows and Macs, I am well aware that the Mac has far higher quality freeware and shareware software available for it. One reason for this is that the software Apple supplies is very well designed. "
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=56 x2=384 y2=96
# text: "However Apple seem to have no interest in either making this great software they create widely used, or in exploiting the extraordinarily good freely distributable Mac software out there."
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=104 x2=384 y2=144
# text: "The Thread Manager is only one of a number of pieces of software that Apple have released in the past few months, but seem to have no interest in letting anyone actually use. "
# item 4: TEXT (0x88) disabled
# bounds: x1=64 y1=140 x2=384 y2=180
# text: "These pieces of software are all released under different rules, obtained from different places, and practically no-one knows how to get hold of all of them or what the latest versions are."
# item 5: TEXT (0x88) disabled
# bounds: x1=64 y1=188 x2=384 y2=224
# text: "As someone who loves the Mac, I find this very disturbing. It seems to me only in Apple’s best interests to allow me to bundle the Thread Manager with Sparkle. "
# item 6: TEXT (0x88) disabled
# bounds: x1=64 y1=224 x2=384 y2=272
# text: "This makes your lives and mine easier, and makes it easier to show non-Mac users more of the unexpected power hidden in the Mac OS. But Apple do not allow me to include the Thread Manager with Sparkle, making you have to find it somehow."
# item 7: TEXT (0x88) disabled
# bounds: x1=64 y1=272 x2=384 y2=296
# text: "If you care about the Mac, I would urge you to tell any Apple personnel you see to look into this policy and do something about it."
DITL_1029_Not enough memory to boot.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=231 y1=98 x2=291 y2=118
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=62 y1=16 x2=316 y2=85
# text: "There is not enough memory to open Sparkle. Please use the Finder to increase Sparkle’s memory allocation then try again."
DITL_2050_Too new prefs file.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=320 y1=200 x2=388 y2=220
# text: "Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=208 y1=200 x2=288 y2=220
# text: "Delete"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=16 x2=352 y2=104
# text: "Sparkle has found a Preferences file (named “^0”) that is more recent than this version of Sparkle understands."
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=116 x2=352 y2=184
# text: "Press the Delete button to have Sparkle delete this file and create a new Preferences file, or press the Quit button to have Sparkle do nothing."
DITL_2051_Too old prefs file.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=320 y1=200 x2=388 y2=220
# text: "Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=208 y1=200 x2=288 y2=220
# text: "Delete"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=16 x2=352 y2=104
# text: "Sparkle has found a Preferences file (named “^0”) that is older than this version of Sparkle understands."
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=116 x2=352 y2=184
# text: "Press the Delete button to have Sparkle delete this file and create a new Preferences file, or press the Quit button to have Sparkle do nothing."
DITL_2052_Corrupt prefs file.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=320 y1=200 x2=388 y2=220
# text: "Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=208 y1=200 x2=288 y2=220
# text: "Delete"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=16 x2=352 y2=104
# text: "Sparkle has found a Preferences file (named “^0”) that is corrupted."
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=116 x2=352 y2=184
# text: "Press the Delete button to have Sparkle delete this file and create a new Preferences file, or press the Quit button to have Sparkle do nothing."
DITL_3000_Too many errors alert.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=300 y1=160 x2=358 y2=180
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=10 x2=331 y2=148
# text: "The file ^0 seems to contain a great many errors. \n\nAre you sure you transferred it to your mac properly? \n\nBe sure to use BINARY mode with ftp or gopher, not AUTOMATIC mode."
DITL_6000_CustomGetFile.txt
# 12 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=135 x2=332 y2=155
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=332 y2=124
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=159
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 9: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=12 y1=164 x2=232 y2=187
# CNTL resource ID: 256
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=12 y1=188 x2=232 y2=208
# text: "Change file type to MPEG"
# item 11: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00011770
DITL_6001_CustomPutFile.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=161 x2=332 y2=181
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=130 x2=332 y2=150
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E865
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=127
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=250 y1=119 x2=334 y2=120
# PICT resource ID: 11
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=15 y1=157 x2=227 y2=173
# text: ""
# item 10: TEXT (0x88) disabled
# bounds: x1=16 y1=136 x2=228 y2=152
# text: "Save as:"
# item 11: CUSTOM (0x80) disabled
# bounds: x1=252 y1=88 x2=332 y2=108
# data: ""
# item 12: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=12 y1=188 x2=232 y2=211
# CNTL resource ID: 257
# item 13: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00011771
DITL_7000_About Sparkle.txt
# 8 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=30 y1=10 x2=247 y2=79
# text: "Sparkle 2.2.2\n28 November 1994\nWritten by Maynard Handley (maynard@elwing.otago.ac.nz)\n"
# item 1: TEXT (0x88) disabled
# bounds: x1=28 y1=84 x2=246 y2=159
# text: "The most recent version can \nalways be found at a sumex-aim \nmirror in info-mac/grf/util.\nTry to use a mirror, not sumex."
# item 2: TEXT (0x88) disabled
# bounds: x1=28 y1=164 x2=248 y2=234
# text: "Thanks to all the people who \nsubmitted bug reports, code \nfragments, documentation and \nother help."
# item 3: TEXT (0x88) disabled
# bounds: x1=250 y1=10 x2=382 y2=254
# text: "PLEASE \nPLEASE\nPLEASE\nRead the \ndocumentation\nbefore mailing\nme a question.\nThis saves time \nfor both you \nand me.\n\nHowever, bug \nreports are\nalways welcome."
# item 4: CUSTOM (0x00) enabled
# bounds: x1=0 y1=8 x2=200 y2=156
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=204 y1=8 x2=404 y2=156
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=0 y1=160 x2=196 y2=244
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=204 y1=160 x2=400 y2=244
# data: ""
DITL_7100_MPEG Playback preferences.txt
# 22 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=260 y1=288 x2=328 y2=308
# text: "OK#100"
# item 1: BUTTON (0x04) enabled
# bounds: x1=180 y1=288 x2=244 y2=308
# text: "Cancel#101"
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=12 x2=184 y2=28
# text: "General:"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=28 x2=248 y2=44
# text: "Prefer 8-bit color to 8-bit grey"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=44 x2=152 y2=61
# text: "Clip YCrCb"
# item 5: TEXT (0x88) disabled
# bounds: x1=16 y1=84 x2=184 y2=100
# text: "8-bit GreyScale Options:"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=100 x2=168 y2=116
# text: "Use 4x4 IDCT"
# item 7: TEXT (0x88) disabled
# bounds: x1=16 y1=132 x2=168 y2=148
# text: "8-bit Color Options:"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=152 x2=168 y2=168
# text: "Use 4x4 IDCT"
# item 9: TEXT (0x88) disabled
# bounds: x1=16 y1=188 x2=184 y2=204
# text: "16-bit Color Options:"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=208 x2=172 y2=224
# text: "Use 4x4 IDCT"
# item 11: TEXT (0x88) disabled
# bounds: x1=16 y1=236 x2=184 y2=252
# text: "24-bit Color Options:"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=256 x2=176 y2=272
# text: "Use 4x4 IDCT"
# item 13: TEXT (0x88) disabled
# bounds: x1=152 y1=132 x2=316 y2=148
# text: "@$CStdPopupPane$StdP$600"
# item 14: TEXT (0x88) disabled
# bounds: x1=152 y1=188 x2=316 y2=204
# text: "@$CStdPopupPane$StdP$601"
# item 15: TEXT (0x88) disabled
# bounds: x1=152 y1=236 x2=316 y2=252
# text: "@$CStdPopupPane$StdP$602"
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=176 y1=100 x2=304 y2=116
# text: "Use Half Pixels"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=176 y1=152 x2=308 y2=168
# text: "Use Half Pixels"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=176 y1=208 x2=308 y2=224
# text: "Use Half Pixels"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=176 y1=256 x2=304 y2=272
# text: "Use Half Pixels"
# item 20: BUTTON (0x04) enabled
# bounds: x1=16 y1=288 x2=96 y2=308
# text: "Try out#4000"
# item 21: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00011BBC
DITL_8000_MPEG Encoder settings.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=320 x2=352 y2=340
# text: "OK#100"
# item 1: BUTTON (0x04) enabled
# bounds: x1=204 y1=320 x2=268 y2=340
# text: "Cancel#101"
# item 2: TEXT (0x88) disabled
# bounds: x1=8 y1=8 x2=164 y2=28
# text: "I-frame quantization:"
# item 3: TEXT (0x88) disabled
# bounds: x1=8 y1=32 x2=164 y2=52
# text: "P-frame quantization:"
# item 4: TEXT (0x88) disabled
# bounds: x1=8 y1=56 x2=164 y2=76
# text: "B-frame quantization: "
# item 5: TEXT (0x88) disabled
# bounds: x1=8 y1=168 x2=112 y2=192
# text: "Frame Pattern:"
# item 6: TEXT (0x88) disabled
# bounds: x1=144 y1=168 x2=160 y2=184
# text: "I"
# item 7: TEXT (0x08) enabled
# bounds: x1=168 y1=8 x2=224 y2=24
# text: "@#1#31"
# item 8: TEXT (0x08) enabled
# bounds: x1=168 y1=32 x2=224 y2=48
# text: "@#1#31"
# item 9: TEXT (0x08) enabled
# bounds: x1=168 y1=56 x2=224 y2=72
# text: "@#1#31"
# item 10: TEXT (0x08) enabled
# bounds: x1=8 y1=96 x2=296 y2=120
# text: "@$CStdPopupPane$StdP$513"
# item 11: TEXT (0x08) enabled
# bounds: x1=8 y1=128 x2=296 y2=152
# text: "@$CStdPopupPane$StdP$514"
# item 12: TEXT (0x08) enabled
# bounds: x1=160 y1=168 x2=297 y2=184
# text: "@$CIBPPatternText$DlTx$512"
# item 13: TEXT (0x08) enabled
# bounds: x1=8 y1=192 x2=264 y2=212
# text: "@$CStdPopupPane$StdP$512"
# item 14: TEXT (0x88) disabled
# bounds: x1=8 y1=232 x2=264 y2=252
# text: "@$CStdPopupPane$StdP$515"
# item 15: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=268 x2=200 y2=284
# text: "Decode reference frames"
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=292 x2=200 y2=308
# text: "Use half pixels"
DITL_8500_Low memory while encoding.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=376 y1=192 x2=444 y2=212
# text: "OK#101"
# item 1: ICON (0xA0) disabled
# bounds: x1=12 y1=8 x2=44 y2=40
# ICON resource ID: 1
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=444 y2=52
# text: "Sparkle has run out of memory while saving a file. The window being saved is being paused and will be displayed ``greyed out’’.\n"
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=56 x2=444 y2=112
# text: "Please close a window in Sparkle, or close another application, to free memory. When you’ve done that, resume the window that’s paused. "
# item 4: TEXT (0x88) disabled
# bounds: x1=64 y1=120 x2=444 y2=184
# text: "You can resume a paused window (or pause a window) by clicking in the movie controller for that window, or typing spacebar, return or command-P while that window is foremost."